Description:
The V-WAC Single Weld Gauge can be used to measure undercut at the toe of the weld for both butt welds and fillet welds. It has a number of other purposes which make it versatile.
It can be used to measure weld cap height and can estimate the size of porosity with the inbuilt porosity comparator. As porosity is often assessed as the number of pores per a given length the V-WAC has a 25mm calibrated section so this assessment can be made.
Features:
- Bite edge depth:0-6mm
- Weld bead height:0-6mm
- Hole diameter: 3mm, 1.5mm (Number of holes per 25mm:25mm)
- Metric design, clear and accurate scale.
- Porosity per linear inch
Specification:
- Size: approx. 102x32mm/4x1.26inch
- Material: Stainless Steel
- Accuracy:±0.5mm
- Thickness:0.93mm
Minimum Sell Quantity: 1 EACH
Order Quantity Multiple: 1 EACH
The images shown are for illustration purposes only and may not be an exact representation of the product.
