MANGANESE BRONZE TIG / OXY BRAZING WIRE 2.4MM X 450G PACK (GP FOR STEEL & CAST) RBCUZN-C

MANGANESE BRONZE TIG / OXY BRAZING WIRE 2.4MM X 450G PACK (GP FOR STEEL & CAST) RBCUZN-C

Manganese Bronze is known for its versatility and good mechanical properties. Its high bond strength makes it suitable for use in a wide range of self-fluxing applications.

Excellent choice for rush jobs or temporary applications involving dissimilar metals or where rust is present. Galvanized parts can be brazed without causing damage to the zinc coating. Best for colour matches on yellow brass and bronze castings. 

The weld deposits are non-porous for leak proof joints for water, oil and gas lines. The weld deposit freezes rapidly from fluid to a plastic state. Preheat is required for some applications and a brazing flux is recommended. Clean joint area as thoroughly as possible. Bevel cracks and heavy sections.

Product specification

2.4mm diameter
450g pack 
Approximately TBA rods per pack
1000mm length rods (approx)
Use with 303 flux found in our store
More control than flux coated rods
Batch certificate of conformance can be supplied
Note: Rods may vary in length but will total weight will be the same
 
Melting point ; 890 Deg C
Tensile Strength ( KPSI) ; 65
Brinell Hardness ; 80 - 100
AWS Specification / Industry Specification : A5.8 RBCuZn-C

Features
Low fuming, bare general purpose bronze filler rod
Ductile weld metal 
Good mechanical properties 

Applications
Suitable for Dissimilar Metals, steel, stainless steel, copper and nickel alloy, Braze welding of bronze, cast iron steel and malleable iron
Great for gas brazing steel, copper alloys, and stainless steel

Minimum Sell Quantity: 1 EACH
Order Quantity Multiple: 1 EACH

The images shown are for illustration purposes only and may not be an exact representation of the product.

{formbuilder:ODU1NzM=}