UNIMIG ENVY 195 10A Multi Process Welder MIG/TIG/Stick U11204

UNIMIG U11204 ENVY Multi MIG/TIG/MMA 195 Welder
The UNIMIG ENVY Multi 195 is a powerful, all-in-one welding machine designed to deliver precision and performance across MIG, TIG, and MMA welding applications. With a user-friendly 5” colour LCD touchscreen, job memory for up to 100 saved settings, and a digital 4-geared wire drive, it provides intuitive control and reliable operation. Built with advanced features like Single and Double Pulse MIG, TIG Smart-Set, Pulse MMA, and Power Factor Correction (PFC), this machine optimises efficiency, reduces heat distortion, and enhances weld quality. It's generator compatible, supports spool and push-pull guns, and includes Hot Start, Crater Fill, and adjustable arc length for seamless starts and finishes. With a rugged 15.5kg build, IP21S rating, and a 5-year UNIMIG warranty, the ENVY Multi 195 is perfect for professionals tackling steel, stainless, aluminium, copper, and more; whether in the shop or out in the field.

Includes:

1 x ENVY MULTI 195 Welder
1 x 3m M26 Digital MIG Torch
1 x 4m SR17 TIG Torch
1 x 4m Twist Lock Electrode Holder
1 x 4m 300 Amp Earth Clamp & Lead
1 x Argon Regulator
1 x 1.8m Quick-Connect Gas Hose
1 x Operating Manual
1 x 2 x 0.8-0.9mm V Groove Rollers
1 x 2 x 0.8-0.9mm F Groove Rollers
1 x 2 x 1.0-1.2mm U Groove Rollers

Features:

5” Colour LCD Touchscreen: Change settings with ease with the intuitive touchscreen controls and next-generation user interface
Smart Fan: Smart Fan diminishes noise, saves power, helps reduce energy costs, and minimises the number of contaminants being pulled through the machine
Power Factor Correction (PFC): Get the most out of your machine. The PFC maximises the electrical efficiency of the machine and automatically compensates for any voltage fluctuations, so you get more output power and the internal components last longer
Job Memory: The job memory function allows you to enter and store weld parameter settings. Weld parameters can be further adjusted and stored as required. A total of 100 Jobs can be memorised and stored for recall
Digital 4 Geared Wire Drive: Experience unparalleled accuracy with our Digital 4 Geared Wire Drive system. Designed to sustain a consistent arc in varying conditions and with different wire types, it ensures an accurate wire feed speed. With this system, achieving precision in every welding task is effortless.
Generator Compatible: Going off the grid? The ENVY MULTI 195 can be connected to a generator, we recommend one with at least 8.5kVA
IP21S Rating: Rated IP21S, so it’s protected from touch by fingers and objects greater than 12mm, and water spray from a vertical direction
Foot Control Ready: This machine supports the connection of both a wired or wireless foot control for extra versatility and convenience while welding. You can adjust your amperage hands-free to avoid disrupting your torch movement, and the wireless option reduces cables and adds greater manoeuvrability as well
MIG Features:
Single & Double Pulse MIG: No spatter. Less heat. Same penetration. Streamline your welds with the single and double pulse functions
Single pulse: A single pulse weld alternates between a peak and base current, which works to minimise the amount of heat input without compromising on any of the penetration. The addition of a base current and reduction in heat means it's perfect for softer materials like aluminium. Pulse welding is also done by spray transfer, eliminating spatter and cutting your post-weld clean-up time.
Double pulse: A double pulse weld alternates between a peak current and two base currents, reducing the heat input of the weld even further than single pulse, while still maintaining all of the benefits. Because of the faster freezing puddle, your double pulse welds come out looking just like a stack of dimes. You get the aesthetics of a TIG weld with all the speed of spray MIG
MIG Smart-Set: Setting up for a weld has never been easier, just set your wire material and size, gas, and joint type and you’re ready to weld!
Complete MIG Weld Cycle Control: Get complete control over your MIG welds with a full set of adjustable parameters, such as pre- and post-gas flow, inductance, and burnback
Spool Gun Ready: Make welding aluminium even easier. No need to change your existing setup. The spool gun lets you quickly switch over and get any job done with no downtime
Push-Pull Gun Ready: Achieve smooth and steady wire feeding, especially when using softer wires such as aluminium. With a ‘Pull’ motor built into the torch, the wire can be fed over a greater distance, granting you the freedom to move and manoeuvre with ease while MIG welding
Hot Start: Get the smoothest arc start possible. The Hot Start function gives a boost of current at the beginning of your weld, eliminating any issues with starting on cold metal, letting you weld on thicker materials and making welding aluminium even easier
Crater Fill: End your welds as strong as they started. Crater Fill ramps your welding current and voltage down at the end of a weld, filling it in at a lower amperage, eliminating craters and pinholes.
Adjustable Arc Length: Get absolute precision on your settings. The adjustable arc length allows you to increase or decrease the preselected voltage while in synergic and pulse MIG modes.
Burnback Adjustment: Stop your wire from ever fusing with your weld or your contact tips again. Tune your burnback control to suit how much wire you want to remain sticking out from your torch when you finish a weld.
Gas-Shielded & Gasless Wires: This machine supports both gas-shielded MIG and gasless MIG, meaning you can run mild steel, stainless steel, aluminium as well as flux-cored MIG wires
Inductance Control: Change the frequency of your short circuit MIG welds with the Inductance settings, so you can choose your preferred arc characteristics

TIG Features:
TIG Smart-Set: The easiest way to set up for a TIG weld, simply set your filler material, joint type, tungsten diameter, material thickness, and gas and you’re good to go!
Tungsten Optimiser: Select the tungsten diameter and get an optimised welding arc ignition in DC TIG based on the chosen diameter
Heat Control Trigger (HCT) Mode: Heat Control Trigger Mode lets you set a base current, which you can switch to at any time during a weld by pressing the trigger button. Heat Control Trigger
Mode is great for manual heat input control as you go
Higher Pulse Frequency: With a pulse frequency as high as 999 pulses per second in DC TIG, you can get as many pulses as you need for any scenario

MMA Features:
MMA (STICK): You’ll be able to weld anything, including cellulosic electrodes
Pulse MMA: Pulse MMA welding helps reduce spatter, improves heat control and allows for an easier removal of slag. It also improves the speed and efficiency of vertical up welds by eliminating the use of the “Christmas Tree” technique, while still maintaining root fusion
Hot Start: The Hot Start feature gives a boost of current at the beginning of your weld, stabilising your ignition and eliminating any issues with striking an arc, especially on difficult electrodes
Arc Force: The Arc Force feature helps to keep the arc stabilised throughout the weld, by increasing or decreasing the peak current to compensate for your arc length, preventing the arc from cutting out or the electrode from sticking
Anti Stick: The Anti Stick feature, which is always on, prevents your electrode from sticking to your workpiece. When the machine detects sticking, the current will drop significantly, so the electrode can be removed
Applications:

MIG: Mild Steel, Stainless Steel, Aluminium, Silicon Bronze
MMA: Mild Steel, Stainless Steel, Cast Iron
TIG: Mild Steel, Stainless Steel, Copper, Silicon Bronze
Specifications:

Primary Input Voltage: 240V Single Phase 50/60Hz
Supply Plug: 10A
Ieff (A): 9.9
Imax (A): 25.5
Rated Output: 25-195A
No Load Voltage (V): 75
Protection Class: IP21S
Insulation Class: H
Minimum Generator (kVA): 8.5
Dinse Connector: 35/50
Standard: AS 60974.1
MIG Specifications:
MIG Welding Current Range: 25-195A
MIG Duty Cycle @ 40°C:
15% @ 195A
60% @ 98A
100% @ 76A
MIG Wire Size Range: 0.6-1.2mm
MIG Wire Spool Size:
1kg (100mm)
5kg (200mm)
MIG Welding Thickness Range: 1-8mm
Drive Roller Size: 30/22
TIG Specifications:
TIG Function Type: DC HF TIG & DC Pulse
TIG Welding Current Range: 10-195A
TIG Duty Cycle @ 40°C:
20% @ 195A
60% @ 112A
100% @ 87A
TIG Welding Thickness Range: 1-8mm
MMA Specifications
STICK Welding Current Range: 10-195A
STICK Duty Cycle @ 40°C:
10% @ 195A
60% @ 112A
100% @ 87A
STICK Electrode Range: 2.5-4.0mm
STICK Welding Thickness Range: 2-12mm
Dimensions (L x W x H): 640mm x 210mm x 400mm
Weight: 15.5kg
Warranty:

5 Year Warranty Covered by UNIMIG

Minimum Sell Quantity: 1 EACH
Order Quantity Multiple: 1 EACH

The images shown are for illustration purposes only and may not be an exact representation of the product.